25
English
To reset the counts see chap 16 - DATA RESETTING
i
counters
000000
total coffees
000000
To view the sum of work performed by the machine, proceed as follows:
1) Turn the programming key to the
OFF
position;
2) Keep the PROG key pressed for at least 5 seconds until the display shows the
total number of selections carried out;
2) By pressing the keys on the coffee selection push button panel or on the milk/cappuccino
selections push button panel, it is possible to view the number of selections made with
that key;
4) To exit automatically from selection counting, do not make any selections for
at least 10 seconds.
The sequence of delivery, be it first milk and then coffee or vice versa, is established in the
machine programming phase (see chapter 15 MACHINE PROGRAMMING)
i
Programming of WARM MILK WITH SHOT OF COFFEE (if provided)
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder
to the delivery group;
• Select the button for milk with a shot of coffee;
• Wait for warm milk delivery;
• To confirm the dose of warm milk, press the key for milk with a shot of coffee again;
• Wait for a few seconds;
• To confirm the length of the pause, press the button for milk with a shot of coffee again;
• Wait for coffee delivery;
• To confirm the dose of coffee, press the key for milk with a shot of coffee again.
Programming of COLD MILK WITH SHOT OF COFFEE
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder
to the delivery group;
• Select the button for milk with a shot of coffee;
• Wait for cold milk delivery;
• To confirm the dose of cold milk, press the key for milk with a shot of coffee again;
• Wait for warm milk delivery;
• To confirm the dose of warm milk, press the key for milk with a shot of coffee again;
• Wait for a few seconds;
• To confirm the length of the pause, press the button for milk with a shot of coffee again;
• Wait for coffee delivery;
• To confirm the dose of coffee, press the key for milk with a shot of coffee again.
• To exit programming, press the PROG key (the machine automatically exits programming if no selections
are made for at least 25 seconds)
• Upon completion turn the programming key to the
OFF
position;
To configure the machine with the WARM MILK WITH A SHOT OF COFFEE selection, contact
technical service.
i
