23
English
1) Fill the filter with the dose of ground coffee and press it with the coffee press;
2) Attach the filter holder to the dispenser assembly;
3) Place the cup under the filter holder;
4) Select the desired dose, for example, 1 espresso coffee (corresponding LED comes on) and wait for deli-
very to be completed.
Use
Programming of each dose must be carried out with ground coffee and not with previously used
grounds.
i
Programming
To interrupt delivery ahead of time, press the STOP key again or press the selected key
again .
If the push button panel is locked, use the manual delivery button.
i
Always program the left-hand push button panel first and then the others, as follows:
• Turn the programming key to the
ON
position (
P
flashes on the display);
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder to the
delivery group;
• Hold the PROG key down for at least 5 seconds (all LED on the push button panel come on);
• Select the dose to be programmed (e.g. 1 medium coffee );
• Wait for delivery to be carried out;
• To confirm the dose press the dose key again (e.g. 1 medium coffee ) or the PROG key .
• Repeat the operation for the other doses and for the other push button panels;
• To exit programming, press the PROG key (the machine automatically exits programming if no selec-
tions are made for at least 25 seconds)
• Upon completion turn the programming key to the
OFF
position;
