22
English
• Press the main switch located on the left-hand part of the boiler cover;
• Wait a few seconds for the auto-test to be carried out;
• The machine is ready for use when the following message is displayed:
please wait for
functional test
test result
- ok -
If the temperature is lower than 90° C (machine warm-up phase),
the message
low
appears on the display.
With the programming key in the
ON
position, the machine can be
partially switched off (heating element and selections disabled) by
simultaneously pressing the keys for 3 seconds.
To put the machine back in service press again the keys simultaneously
for 3 seconds.
i
Be careful with tea delivery, as the water is very hot.
i
ro
g
ro
g
Latt
e
Mac
chia
to
Hot
Milk
Cap
pucc
ino
Foa
med
Milk
Latt
e
Auto
Stea
mer
Add
ition
al
Hot
Milk
Key for
programming
Use
Programming
1.0 atm 120°C P
09:16 09-02-04 1
Boiler pressure
Boiler temperature
Hours
Date
Day of the
week
Programming
1 - Monday
2 - Tuesday
3 - Wednesday
4 - Thursday
5 - Friday
6 - Saturday
7 - Sunday
1) position a cup under the hot water delivery spout;
2) Press the hot water key and wait for delivery to be completed;
3) To interrupt delivery ahead of time, press the hot water key again .
• Turn the programming key to the
ON
position (
P
flashes on the display);
• Hold the PROG key down for at least 5 seconds (all LED on the push button panel come on);
• Select the tea key ;
• Wait for delivery to be carried out;
• To confirm the dose press either the tea key or the PROG key again.
• To exit programming, press the PROG key (the machine automatically exits programming if no selections are
made for at least 25 seconds);
• Upon completion turn the programming key to the
OFF
position;
