Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 336 / 414

21
Engine Control Linkages GASOLINE VEHICLE - FUEL SYSTEM
ENGINE CONTROL LINKAGES
See General Warnings on page 1-2.
DANGER
• To ensure the vehicle does not run over you while you disconnect or adjust the accelerator push
rod, do the following:
– Turn key switch OFF and remove key, place Forward/Reverse handle in the NEUTRAL position,
and chock the wheels prior to servicing the vehicle.
– Disconnect battery cables, negative (–) cable first.
– Disconnect the spark plug wire from the spark plug.
–
See Disconnecting the Battery- Gasoline Vehicles on page 1-3.
GENERAL INFORMATION
For proper vehicle operation, it is important the accelerator cable, governor linkage, and throttle adjustments are done
correctly and in the proper sequence.
See following CAUTION.
CAUTION
• Improper adjustment can result in poor vehicle performance and/or damage to the engine components.
3123
Figure 21-4 Engine Control Linkages – Villager 2 EFI vehicles
Page 21-8 2019 Precedent Villager 2 Maintenance and Service Manual