FE350 ENGINE
General Information
Page 13-2 2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual
13
GENERAL INFORMATION
Read DANGER and WARNING on page 13-1.
All Club Car gasoline vehicles are powered by 4-cycle, overhead valve, single cylinder, air-cooled engines.
The 4-cycle engine has an oil reservoir (crankcase) similar to automobiles, trucks, aircraft, heavy equipment,
machinery and other applications designed for reliable heavy-duty service. The engine has two major com-
ponent assemblies: the cylinder assembly and the crankcase assembly. See following NOTE.
NOTE: Engine rotation is clockwise as viewed from the clutch side of the engine.
SPECIAL ENGINE SERVICE TOOLS AVAILABLE FROM CLUB CAR
BEFORE SERVICING
To eliminate unnecessary work, carefully read the applicable information and instructions before beginning
engine service. Diagrams, DANGER, WARNING, CAUTION and NOTE statements and detailed descriptions
have been included wherever necessary. Nevertheless, even a detailed account has limitations. Therefore,
anyone attempting engine service should have knowledge and experience in small engine service and
repair.
MECHANICAL SYSTEMS
Adjustments
All adjustments shall be made in accordance with Section 10 – Periodic Maintenance.
DESCRIPTION
PART NUMBER
Gear yoke
1016418
Compression gauge and adapter
101641002
Valve spring compressor
101641101
Valve guide reamer
101641201
Valve guide reamer arbor
101641202
Piston ring compressor kit
1016414
Piston ring pliers
1016415
Bearing driver set
1016416
Flywheel puller kit
1016627
Valve clearance adjuster screw holder
1016413
Bearing and seal remover assembly
1016417
Valve seat cutter T wrench
1016551
Valve seat cutter 45° x 32 mm diameter (for FE290 engines only)
1016553
Valve seat cutter 30° and 45° x 35 mm diameter
1016554
Valve seat cutter guide
1016552
