ELECTRICAL COMPONENTS
Oil Warning Light
Page 12-22 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
12
∆ CAUTION
• Do not overtighten the retaining nuts. If the nuts are overtightened, limit switches could be damaged.
3. Place the Forward/Reverse handle in REVERSE to make sure that only the reverse buzzer limit switch
is actuated.
4. Connect the orange wire to the common (COM) terminal and the red/white wire to the normally open
(NO) terminal of the reverse buzzer limit switch (4) (Figure 12-20, Page 12-19).
5. Connect battery cables, positive cable first and tighten the terminals to 20 ft-lb (27.1 N·m). Coat termi-
nals with Battery Protector Spray (CCI 1014305).
6. Turn the key switch to the ON position. Shift the Forward/Reverse handle to the REVERSE position.
The buzzer should sound.
OIL WARNING LIGHT
Read DANGER and WARNING on page 12-1.
Testing the Oil Warning Light
See Test Procedure 22, Section 11, Page 11-38.
Figure 12-23 Fuel/Hour Gauge and Oil Warning Light Installation
UNDER
16
WARNING
OFF
ON
1
5
2
3
4
