MOTOR (MODEL DA5-4006)
Motor Installation
2008-2011 IQ Plus Electric Vehicle Maintenance and Service Supplement
Page 16-15
16
9. Place the Tow/Run switch in the TOW position and connect the batteries, positive (+) cable first. Tighten
battery terminals to 110 in-lb (12.4 N·m) and coat terminals with Battery Terminal Protector Spray (CC P/
N 1014305) to minimize corrosion.
10. Place the Tow/Run switch in the RUN position.
11. Inspect the vehicle for proper operation.
See following WARNING.
ý
WARNING
• Make sure that the vehicle operates in the forward direction when the Forward/Reverse switch
is in the FORWARD position.
• Make sure that the vehicle operates in the reverse direction when the Forward/Reverse switch
is in the REVERSE position. The reverse buzzer will sound as a warning when the Forward/
Reverse switch is in REVERSE.
• Make sure that the vehicle does not operate when the Forward/Reverse switch is in the
NEUTRAL position.
Figure 16-20 Motor Mount
VIEWED
FROM
DRIVER
SIDE
2
3
1
4
