Club Car Carryall 500, Maintenance And Service Manual

Page: 338 / 456

20
Starter/Generator
ELECTRICAL COMPONENTS: PEDAL-START
GAS VEHICLE
A
B B
A
1
1
1
1
A
1
A
2
1
1. Measure each position in two places, 90 degrees apart
496
Figure 20-10 Inspect Commutator
ARMATURE GROUND TEST
CAUTION
• Do not submerge armature in solvent.
NOTE: Before testing, wipe the armature with a clean cloth and remove carbon dust and metal particles from between
commutator bars.
Using a multimeter set on 200 ohms, place the positive (+) probe on the commutator bars and the negative (–) probe
on the armature core. The reading should be no continuity. If the reading is incorrect, replace the armature and the
two bearings
(Figure 20-11, Page 20-9) .
Page 20-8 2017 Carryall 500 and 700 Maintenance and Service Manual