Club Car CARRYALL 252 2007, Maintenance And Service Manual

Page: 39 / 536

BODY AND TRIM Receiver Hitch (Optional On Some Models)
4
2. Where the hitch (7) is mounted to frame, remove two nuts (12), lock washers (11), flat washers (10), and bolts (9)
(Figure 4-3, Page 4-8) .
3. Where the hitch (7) is mounted to hitch brace (8), remove the nut (12), lock washer (11), flat washer (10),
and bolt (9).
4. Remove hitch (7) from vehicle.
TRAILER HITCH INSTALLATION
1. Install trailer hitch (7) in the reverse order of removal (Figure 4-3, Page 4-8) . Tighten hardware to 180 in-lb
(20.3 N·m).
RECEIVER HITCH (OPTIONAL ON SOME MODELS)
See General Warning on page 1-1.
RECEIVER HITCH REMOVAL
1. Remove the tailskirt. See Tailskirt Removal on page 4-10.
2. Remove two 5/16-18 hex nuts (6), lockwashers (7), flat washers (5) and 5/16-18 x 1-inch bolts (2) from the
top of hitch (4)
(Figure 4-4, Page 4-10) .
3. Remove two 5/16-18 hex nuts (6), lockwashers (7), flat washers (5) and 5/16-18 x 1-inch bolts (2) where the hitch
(4) mounts to the vehicle frame and remove the hitch.
RECEIVER HITCH INSTALLATION
1. Reverse the receiver hitch removal process and tighten nuts to 180 in-lb (20.3 N·m) (Figure 4-4, Page 4-10) .
2. Install the tailskirt. See Tailskirt Installation on page 4-10.
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual Page 4-9