HYDRAULIC ATTACHMENT SYSTEM
Electrical
19
CIRCUIT BREAKER
Testing the Circuit Breaker
1.
Check for continuity between each post.
2.
If there is no continuity, press the reset button and check again for continuity.
3.
If there is still no continuity, replace the breaker.
Circuit Breaker Removal
1.
Empty and raise cargo bed.
2.
Set the joystick ON/OFF switch to OFF.
3.
Disconnect battery.
See Side-Post Battery: Disconnecting the Battery – Gasoline/Diesel Vehicles on page
1-3.
See Top-Post Battery: Disconnecting the Battery- Gasoline/Diesel Vehicles on page 1-4.
4.
Disconnect wires from each post of circuit breaker.
5.
Remove hardware securing breaker to chassis and remove breaker.
Circuit Breaker Installation
1.
Attach breaker to chassis with screws and tighten to 75 in-lb (8.5 N·m).
2.
Connect wires to breaker. Tighten nuts to 75 in-lb (8.5 N·m).
3.
Connect battery.
See Side-Post Battery: Connecting the Battery – Gasoline/Diesel Vehicles on page 1-4.
See Top-Post Battery: Connecting the Battery- Gasoline/Diesel Vehicles on page 1-4.
4.
Lower the cargo bed.
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
Page 19-19
Summary of Contents for Carryall 1500 2016
