BODY AND TRIM
Flat Bed Trim – Turf 6 and Carryall 6
Page 4-8 2000 Turf/Carryall Vehicle Maintenance and Service Manual
4
5. Remove two 5/16 x 1 hex head bolts (4) and locknuts (6) from each of the two handles on rear edge of
bed. Remove the two handles (7) and rear trim strip (3)
.
6. Remove one 5/16 x 1 hex head bolt (4), flat washer (5), and locknut (6) from front of left hand trim strip
(1)
.
7. Remove two 5/16 x 1 hex head bolts and locknuts from each of the three stake side brackets (7) on left
hand trim strip. Remove brackets and trim from bed
.
8. Repeat steps 6 and 7 to remove right hand trim strip and brackets.
Figure 4-3 Flat Bed - Turf 6 and Carryall 6
3
5
TYPICAL 2
PLACES
10
9
21
23
24
TYPICAL 2
PLACES
TYPICAL 2
PLACES
27
28
22
26
TYPICAL
2 PLACES
20
18
19
20
TYPICAL 2
PLACES
19
25