HOLD
MODE
USE AT OUR OWN RISK.
HOLD MODE SHOULD ONLY BE USED WHEN TRIGGERING EFFECTS
THAT YOU WANT TO REMAIN
ON
FOR AN EXTENDED PERIOD OF TIME.
WITH HOLD MODE ENABLED, PRESSING THE ASSIGNED BUTTON WILL ACTIVATE CUE,
UNTIL THE BUTTON IS PRESSED A SECOND TIME. USE WITH FANS, HAZERS, LEDS, ETC.
CONFIRM
& ACCEPT
BACK
TO SAFETY
TANK
CALCULATOR
DAISY CHAINED TANKS
DISPLAY
STYLE
SELECT YOUR DESIRED STYLE
BUTTON
SETTINGS
TAP ICON TO CHANGE COLOR
CURRENT
TANK VALUES
NO TANKS / SEPARATE TANK
LB
KG
REFILL
#1
REFILL
#2
REFILL
#3
REFILL
#3
ADD TO TIME
ADD TO TIME
ADD TO TIME
ADD TO TIME
DMX
ADDRESS
SET STARTING ADDRESS
SET
MODE
FOR THIS BANK
HOLD
MODE
HOLD
MODE
HOLD
MODE
HOLD
MODE
20LB
50LB
75LB
CLEAR
DISABLE
BANK
ALSO TURNS OFF BUTTON LEDS
SAVE
& EXIT
IT’S SHOTIME.
100 100 100 100
SECONDS
JETS
TANKS
4 ZONE
DS CRYO
JET 1
JET 2
2
30
4
60
60
60
60
JET 3
JET 4
001
REFILL
ALL
WITH ABOVE VALUE
SELECT
COLOR
PRESET
CUSTOM
SELECT
COLOR
+
+
+
+
+
+
PRESET
CUSTOM
BUTTON
SETTINGS
BANK
SETTINGS
Each cue button can be customized to display a different color & name. Bump (momentary) is the
default cue function, but if desired “HOLD MODE” can be utilized for a latching cue.
Operator has several color options for cue buttons.
To assign a color to an entire bank, press and hold
any ring until the “SET COLOR” window appears.
NO COLOR is a useful selection to identify an
unused cue (turns off the buttons LED).
If a custom color is desired, press the CUSTOM
button at the top right corner of the color window.
This will allow any color to be selected in the
gradient, and then stored for repeated use.
NOTE:
Custom button colors are not available for
LED Attachment & FOG modes, as the macros are
hard coded.
When effects are to remain on for an extended
duration, utilize HOLD MODE on the desired cues.
User will be prompted with a warning before being
able to activate HOLD MODE.
This is useful for lights, fans, hazers, etc.
TAP TO CHANGE
CUE NAME
TAP TO CHANGE
COLOR
(HOLD TO CHANGE ENTIRE BANK COLOR)
HOLD (LATCH)
ENABLE/DISABLE
8
