V 1.0
–
12/03/2020
–
CLS-ENV-MU-20-0106
34
•
"Add Platform": enter a new hexadecimal ID and it will appear in the list of your Favorite
Platforms, once saved
•
“Get
All
messages”
display all the memory recorded messages and eventually export them
(see below)
•
"Delete all platforms": all favorite platforms will be deleted
•
"Delete all messages": erase all messages for all platform (remove all data registered into
internal memory)
6.7.
Template information for direct reception
The parameters displayed during the direct reception mode (bearing and distance to platform) are
calculated using the GNSS information from the platform and the goniometer. The GNSS information
from the platform is extracted from the user message by the goniometer and then it calculate the
distance and heading comparing to Goniometer own GPS position.
In order to have the format of your platform declared in the goniometer software please contact CLS.
Note that the messages of your platform shall not be encrypted.
6.8.
Viewing and Exporting data
•
Clicking on get All Messages you can view and export data recorded on the Goniometer for
the defined favorite platforms.
•
To add a platform to the favorites, select it in the "receiving platforms" and click "Add to
favorites".
•
To view the data from a favorite platform, select it and click "get All messages", and you will
see a screen like the one shown on next page.
Column description:
1.
record index
2.
status of GPS from direction finder (in this case the GPS was not on)
3.
Period validity (integrity control)
4.
Date
5.
Frequency of platform (Hz)
6.
Instantaneous Reception direction relative to the Gonio antenna reference (deg.)
7.
Signal level received from platform (dBm)
8.
Transmission period (seconds)
9.
Latitude of the Gonio (degrees)
10.
Longitude of the Gonio (degrees)
11.
Direction of the Gonio relative to the north (degrees)
12.
Length of data, in bytes
13.
Data content (message)
