Clover TFT1904Q, Setup Manual, Page: 1 / 3

INFRA-RED RECEIVER MODE/ ← VOLUME ▼ / ↓ TALK
MICROPHONE MENU CH/ → VOLUME ▲ / ↑ POWER
1.
®
: Receives signal from remote controller to the monitor.
2. MENU Button : After pressing this button, user can go into the “SETUP” Menu. To select any of Menu items, press the
button again. This button is also used by down arrow key in Sub-Menu.
3. MODE/ ← Button : Press this button to display the Quad, Live, PIP and the POP modes. This is also used by Left arrow key
in Sub-Menu.
4. CH/ → Button : It displays each 1CH, 2CH, 3CH and 4CH in full screen when this button is pressed. For Example,
1CH → 2CH → 3CH → 4CH → 1CH. When user wants to talk to a specific camera location, choose one of channels. This is
also used by Right arrow key in Sub-Menu.
5. ▼ / ↓ Button : Decreases volume sound. This button is used by down arrow key in Setup Menu. And this is also used by
changing the value in Sub-Menu.
6. ▲ / ↑ Button : Increases volume sound. This button is used by up arrow key in Setup Menu. And this is also used by
changing the value in Sub-Menu.
7 . TALK Button : T he two-way audio feature. By pressing and holding this button the user has the ability to talk to a specific
camera location. This button must be pressed the entire time while talking. To listen to the camera location releases the talk
button.
8. Φ Button : Power on/off.