12
DVX
Instruction
Manual
two pages of the summary. All views can be printed at any time by selecting
File | Print
in the main menu, or pressing
the print icon in the toolbar.
Shake Disc
When the Autoloader is attached, you can enable this option, which will cause it to shake the disc when picking from
the input stack. Enable this if you have trouble with discs sticking together.
Disable Reject
When enabled, this will prevent the Autoloader from outputting a failed disc to the reject bin. Instead, all discs will be
output to the “good” output bin.
Table 1 - AutoSave Rules
Enter User Info Off:
Prompt for Filename Off
Uses made-up filename
Prompt for Filename On
Prompts for filename with default made-up name
Enter User Info On:
Prompt for Filename Off
Uses User Info Box #1
Prompt for Filename On
Prompts for filename with default User Info name
LOADING THE DISC
Insert a disc in the tray label side up. Press the EJECT button on the front panel, or
Eject!
in the main menu to load the
disc. The BUSY light will come on for a few seconds as the drive reads the Table of Contents. The Drive Status
display will show “LOAD DISC”. Wait ‘till the light goes out and Drive Status reads “READY”.
Entering User Information
You can enter up to 10 fields of user information. This can be things like work order, disc identification, publisher, or
anything else you wish. Labels describing each field are user customized.
User Info can be enabled or disabled in the
Settings
tab of the
Preferences
dialog. To enable User Info, check the
“Enter User Info” checkbox.
When enabled, the User Info dialog will appear whenever a new disc is loaded. To set up the User Info dialog, press
the “Edit Labels” button. This will allow you to edit the labels for each field. You will be prompted for a password, to
avoid unauthorized modification of the labels. The password is the same one used for entering Alarm Limits. The
default password is “Clover” (without the quotes), and is case sensitive. You can change the password by checking the
“Change” box in the password dialog. Each label can be up to 64 characters. Use the tab key to advance to the next
label. The labels will be permanently saved in the Registry.
To enable the fields you want to use, check the checkbox next to the edit box.
