USER MANUAL : CDS552 CIRRUS LOOP LOGGER
DOCUMENT NAME
CLASSIFICATION
DATE
PAGE
CDS552 CIRRUS LOOP LOGGER USER
MANUAL
CONFIDENTIAL
15-JUL-21
28 OF 29
2.3 CDS552 Cirrus Loop Logger Setup via Offline Script Configure
Once activated, the correct blank Scripting Editor screen will be displayed, ready for the capture of the settings that need to
be altered.
Since the device is offline the only parameters available are the Device Code and Firmware Version which are picked up
from the communications register.
As you can see the parameters are the same as when you configure via the Bluetooth setup option with one or two minor
exceptions explained later.
All the parameter fields are empty at this point. To create a script, simply enter the new values for the parameters you wish
to change in the correct fields.
The script will only be generated for the parameters that have been altered in this form.
Should you wish to restart your parameter changes, you can press the 'Clear Configuration' button in the top tool bar to
reset all the fields.
When generating a script for your new parameters, you have an option of adding to the current script or replacing the
script with only your new one. To do this, press the 'Create Script' dropdown button on the top tool bar and select the
option you require.
On the right of the screen is a table of the current script that appears in the database with the status of each command
tabled. This would include older scripts that are still present in the database. Each command has associated with it a status
- either Pending or Complete.