USER MANUAL : CDS552 CIRRUS LOOP LOGGER
DOCUMENT NAME
CLASSIFICATION
DATE
PAGE
CDS552 CIRRUS LOOP LOGGER USER
MANUAL
CONFIDENTIAL
15-JUL-21
26 OF 29
2.2 CDS552 Cirrus Loop Logger Setup via Remote Configure
Once the remote connection has been established, Cloudworks will automatically download the current setup data and
display it on the screen. This data can be refreshed at any time by pressing the 'Refresh' button in the top menu.
As you can see the parameters are the same as when you configure via the Bluetooth setup option. Again, data update
commands are sent to the device only after the parameter setup field has been left. What this means is that while adjusting
a parameter in its input box, no commands are sent to the logger. Once you have completed entering the field and leave it
for the next function, only then will the command be sent.
Should the instruction fail to send or not be acknowledged by the logger, you will get a prompt alerting you to the failed
command. This parameter change should be attempted again.
Apart from that, functions are the same as the Bluetooth Setup with the exception of three buttons on the top tool bar. The
'Reset Device' button is self explanatory and will initiate a reset of the logger. This would really only be used if there has
been some really unexplained behaviour linked to the loggers operation.