Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd.
15
5. Installation
Installation Overview
A complete working system consists of the fiber laser source, the laser arm with the galvo
lens, the laser key, a computer (not included) with engraving software (included), and all
applicable connection cables. A support column and workbench come included to assist your
work. Users can also configure other additional accessories (such as a rotary axis) to suit
their needs.
Please note the specific requirements of your system's installation. Every customer must
understand these notes before installation to execute a proper setup and achieve safe laser
performance. If you have any installation questions or problems, contact our technicians and
customer support team.
Any auxiliary equipment must be adjusted to the base machine. Queries may be directed to
the dealer or manufacturer of such equipment.
Location Selection
Prior to assembling your fiber laser marker, select an appropriate location for its use.
Be sure that it meets all of the requirements discussed in the Safety Information above. The
location should be stable, level, dry, and climate controlled to ensure an ambient temperature
40
–95°F and an ambient humidity under 70%. In particular, the temperature and humidity
together should not be close to the dew point. It is also advisible to use a windowless room
or to use blinds and/or curtains to avoid exposure to the potential additional heat of direct
sunlight. The location should be free of dust and other airborne pollutants and well ventilated
enough to process any fumes produced by the engraving process in accordance with all
applicable laws and regulations. Depending on the materials to be processed, this may
require construction of a dedicated ventilation system. It should be away from children;
combustible, flammable, explosive, or corrosive materials; and sensitive EMI devices. The
power cord should be plugged into a compatible and stable power source via a grounded 3-
prong outlet. No other item should be drawing current from the same fuse. There should be
fire-fighting equipment nearby and the local fire department's phone number should be
clearly displayed.
It is highly recommended to have an extra work table nearby in order to avoid placing objects
on or directly adjacent to the machine, which could become a fire or laser hazard.
Use only the hardware, wiring, and power sources that came with or are
compatible with this device. Installing equipment that your device is not
designed to work with can lead to poor performance, shortened service
time, increased maintenance costs, property damage, and personal
injury.
