CX163 Installation and User Guide v1.1
4
Safety Information
Important Safety Instructions
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
•
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
•
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
•
Only use attachments/accessories specified by the
manufacturer.
•
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-
over.
•
Unplug this apparatus during lightning storms or when
unused for long periods of time.
•
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
WARNING:
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified may result in hazardous radiation
exposure.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOQUE ÉLECTRIQUE - NE PAS OUVRIR
The lightning flash with the arrowhead symbol within
an equilateral triangle, is intended to alert you to the
presence of uninsulated dangerous voltages within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Un point d’exclamation dans un triangle équilatéral est destiné
à alerter l’utilisateur de la présence d’instructions importantes
sur le fonctionnement et l’entretien (la réparation) dans la
documentation accompagnant l’appareil.
The mains plug is used as the disconnect device and it
should remain readily accessible during intended use. In
order to electrically isolate the apparatus from the mains, the
mains plug should be completely removed from the mains
outlet socket.
La prise du secteur ne doit pas être obstruée ou doit être
facilement accessible pendant son utilisation. Pour être
complètement déconnecté de l’alimentation d’entrée, la prise
doit être débranchée du secteur.
Meaning of the label: Evaluation for apparatus only
based on temperate climate condition, therefore it’s
the only operating condition applied for the
equipment .There may be some potential safety hazard if the
equipment is used in tropical climate region.
L’évaluation pour les appareils est basée dans une condition
climatique tempérée, donc c’est la seule condition de
fonctionnement à appliquer pour l’appareil. Il peut y avoir un
risque potentiel pour la sécurité si l’équipement est utilisé
dans une région climatique tropical.
Meaning of the label: Evaluation for apparatus only
based on altitude not exceeding 2000 m, therefore
it’s the only operating condition applied for the
equipment .There may be some potential safety hazard if the
equipment is used at altitude above 2000 m.
L’évaluation pour les appareils est basée uniquement sur une
altitude inférieure à 2000 m, donc c’est la seule condition de
fonctionnement à appliquer pour l’appareil. Il peut y avoir un
risque potentiel pour la sécurité si l’équipement est utilisé
avec une altitude au-dessus de 2000 m.
Conformities
This product conforms to the following European EMC
Standards:
BS EN 55103-1:2009, BS EN 55103-2:2009
This product has been tested for use in commercial
and light industrial environments. If the unit is used
in controlled EMC environments, the urban
outdoors, heavy industrial environments or close to railways,
transmitters, overhead power lines, etc., the performance of
the unit may be degraded.
The product conforms to the following European electrical
safety standard:
BS EN 60065:2012
