29
FIG. 1
Drawer
DOOR & DRAWER ASSEMBLY
PARTS
7. Use the charts below for standard drawer, basket and hamper door combinations (“A” through “J”). Start by
placing the first set of drawer runners in the first hole above the bottom fixed shelf.
(FIG. 4)
Then, count
holes again for each additional drawer or basket as shown in the chart below. (See Basket Assembly for
basket hole spacing.)
8. If drawer faces do not align properly, use shims and a level to raise or lower, as appropriate, the
relating partitions.
9. You must install one fixed shelf after every three (3) drawers
(as in combo C)
. For combinations B, E, F,
H, I and J, install the middle fixed shelf below the second drawer. (Middle fixed shelves mount to the holes
directly below the immediate drawer runner above.)
FIG. 3
FIG. 2
CAM LOCKS
96 mm
128 mm
FIG. 4
Summary of Contents for MasterSuite
