ClosetMaid ExpressShelf Installation Instructions Download Page 1

Page: 1 / 3

Reach-in Configurations -

Wall-to-Wall

INSTALLATION INSTRUCTIONS

Tools needed:

Tape measure, level, pencil, #2 Philips head screw driver or power drill with a 6" #2 Philips bit,

Midre saw with

12" dia. x 1/8" thick

wood-cutting blade (for cutting shelf), optional drill template, tube cutter, hacksaw (for cutting closet rod)

Parts required:

Shelf, backwall channel, sidewall bracket, universal pole cup, shelf and rod angle brackets or shelf angle

brackets, closet rods, closet rod end caps, shelf trim, drywall fasteners [Easy anchors with #8 x 1-1/4" flat head wood screws], stud

fasteners [4.5 x 60 mm wood screws], #6 x 5/8" flat head wood screws [for securing components to the shelf or shelf to hardware]

and self-tapping screws [to secure the closet rod to the universal pole cup]. Make sure you have the right sizes and universal end

caps as applicable.

Replacement Warranty:

You must follow the manufacturer’s instructions supplied by ClosetMaid to ensure eligibility for the

replacement warranty.

For video instructions: Visit www.closetmaidpro.com/ExpressShelf.

Premium Wood Collection

Summary of Contents for ExpressShelf

Page 1: ...rod angle brackets or shelf angle brackets closet rods closet rod end caps shelf trim drywall fasteners Easy anchors with 8 x 1 1 4 flat head wood screws stud fasteners 4 5 x 60 mm wood screws 6 x 5...

Page 2: ...points Do not cut along the deck slat STEP 3 Install Sidewall Brackets Slide edge or sidewall bracket into alignment with end of backwall channel at the return wall Secure sidewall brackets using easy...

Page 3: ...t not more than 32 in apart Attach by sliding the angle support brackets underneath the front lip of the ventilated wood shelf until the shelf is level and the bracket is flat against the shelf and wa...