Cloos NexT 452 AC, Operating Instructions Manual

Page: 109 / 234

109
14.4 Activate job
To activate existing jobs, shortly press the "Job" button.
You are now in Job selection mode. All available jobs are listed on the dis-
play. Select the job to be activated by means of rotary knob 3. Press the job
button again or the rotary knob 3 to activate the selected job. The LED on
the job button lights up. The job number and job name are displayed in the
lower part of the "MAIN" menu. If you want to activate another job, tap the
job button again. You are now back in the selection menu.
To exit the job mode, press the job button for more than 2 seconds (the LED
goes out). You are back in the job-free mode.
15. Main (3) - Weld data monitoring
For more information about the "Weld data monitoring" option, refer to
chapter "3. SD-Modul" on page 152.