- 15 -
press
+
or
–
button to set the printing position <0~9>
Press Enter again to register the setting value.
( The default setting is 0005.)
4.15 Detecting front/back of cards
Press Enter or Back to enter the program code
12
.
Press
+
or
–
button to select the flashing value
“0000”
or
“0001”. “0000” is for closing this function, “0001” is for starting this
function. Press Enter again to register the setting value.
( The default setting is 0000.)
*The detection function operates only when you use specific time
cards (monthly pay cards) with front/back detection cut-out.
4.16 Setting the regular time signal (0-99Seconds)
Press Enter or Back to enter the program Code
13
,
Press
+
or
–
button to set time signal duration and
the initial value (10 seconds) will appear.
The duration can be set from 0~99 seconds.
( The default setting is 0005.)
Press Enter again to register the setting value and enter
code
14
so as to setting the time of 1
st
ringing
Press
+
or
–
button to set the Hour.
Press Enter again to register the setting value.
Press
+
or
–
button to set the Minute.
Press Enter again to register the setting value.
Press
+
button to set the week.
Press
–
button to cancel the week.
Press Clear button to set everyday.
Doing the same as above to enter code 15~37 and complete the setting of
2
nd
~24
th
ring times if necessary.
( The default setting is - - :- - )
4.17 Setting the shifting time
Press Enter or Back to enter the program Code
38
,