Clipper BBC157, Owner'S Manual

Page: 5 / 36

5
Dust and Silica Warning
Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust,
mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as
respiratory disease, cancer, birth defects or other reproductive harm. If you are unfamiliar with
the risks associated with the particular process and/or material being cut or the composition of
the tool being used, review the material safety data sheet and/or consult your employer, the
material manufacturer/supplier, governmental agencies such as OSHA and NIOSH and other
sources on hazardous materials and make certain to comply with all product warnings and
instructions for the safe and effective use of the material being cut. California and some other
authorities, for instance, have published lists of substances known to cause cancer,
reproductive toxicity, or other harmful effects.
Control dust, mist and fumes at the source where possible. In this regard use good work
practices and follow the recommendations of the manufacturer/supplier, OSHA/NIOSH, and
occupational and trade associations. Water should be used for dust suppression when wet
cutting is feasible. When the hazards from inhalation of dust, mists and fumes cannot be
eliminated through engineering controls such as either vacuum and/or water mist, the operator
and any bystanders should always wear a respirator approved by NIOSH/MSHA for the
material being cut.
Use Approved:
Eye Protection Hearing
Protection
Respiratory
Protection
Head Protection