21
For the Phonizer_UART.exe (Phonizer_USB.exe), there are following three *.ini files:
Ini file
Explanation
bs_addr.ini
BD_ADDR of a dedicated Cordless Telephony
gateway, i.e. your BS-V100.
called_number.ini
Initial H.323 address for outgoing VoIP call.
com.ini
(only for Phonizer_UART.exe)
PC’s COM port configuration (port number and
baudrate).
When CSR’s BlueCore01 is used, the UART configuration of the baseband to be used with the
Phonizer_UART.exe should be like this:
UART baud rate: 115200
UART: flow control: Enabled
UART: non-BCSP enable?: Enabled
UART: Parity bit: No parity
UART: RTS Auto enabled?: False
UART: RTS enabled?: Enabled
UART: Stop bits: One stop bit
Data bits: 8bit
Following procedure shows how to connect the Phonizer to your BS-V100 and make or accept a VoIP
call.
1. Execute the Phonizer. User interface of the Phonizer appears on the screen.
2. Click the ‘Bluetooth logo’ button located at the center of the Phonizer UI. Phonizer
initializes its Bluetooth hardware and automatically tries to connect with a dedicated
Cordless Telephony gateway. After the Bluetooth link level connection is established,
the Phonizer automatically tries to open a TCS channel.
