Clinton Electronics VF1000IR, Installation Manual, Page: 31 / 34

Problem Solution
The MOTION DETECTION
function is not working.
Check if ‘MOTION DETECTION’ mode is •
turned on.
Check if the MD LEVEL is too low. •
Check the setting of the MD AREA. •
Colors are not quite right.
Check the ‘WHITE BAL’ setting. •
The screen is flickering.
Check if the camera is facing directly into •
sunlight or fluorescent light.
L/L mode isn’t able to be
selected.
Have you connected your camera to DC •
power source? Connect it to AC power
source.
L/L mode is not available.
When using DC 12V input power, ‘SYNC’ •
mode is fixed to ‘INT’.
COLOR (DAY & NIGHT) mode
is not working.
Check if the AGC menu is set to the OFF •
position.
SENS-UP function is not
working.
Check if the AGC menu is set to the OFF •
position.
Check the limit of SENS-UP AUTO mode. •