1. INSTALL MOUNTING PLATE
Secure the Mounting Plate to a compatible conduit box (Single Gang, Double Gang, 3-1/4" & 3-1/2", or 4"
Oct/Rd) using the screws that came with the conduit box, or mount to a solid surface using the 4 screws
included with this camera.
*Information in this document
is subject to change without notice
v.05.27.15
clinton
electronics
| 6701 Clinton Road Loves Park, IL 61111 | 800.447.3306 (Sales) | 800.549.6393 (Support) | www.clintonelectronics.com
3. CONNECT CABLES
Make connections to the BNC cable and the power connection. Feed any cable slack into the mounting
surface. A green LED (near the OSD Joystick and DIN Connection Port) will light up on the circuit board
when the camera is receiving power. To ensure quality operation, verify proper BNC and power termina-
tion, along with proper voltage at camera.
NOTE: It is recommend to use drywall anchors if mounting to drywall. Drywall anchors not included.
IDX Series
[IR]
Install Guide
For IR LED Equipped Cameras: IDX18(B) • IDX30(B) • IDX50(B)
2. REMOVE DOME COVER
Hold the dome cover with one hand while gripping the finger grip tabs on the bottom of the camera base.
Turn the finger grip tabs (camera base) counter-clockwise to separate it from the dome cover.
4. ATTACH CAMERA TO MOUNTING PLATE
Attach the camera to the mounting plate by aligning the hooks on the mounting plate to the tabs on the
camera base. Twist the camera base clockwise to lock it in place.
• IDX Series Camera x 1
• Mounting Plate x 1
• 4x20mm Screws x 4
• Instructions x 1
• Test Monitor BNC Lead x 1
FINGER GRIPS
Included Items:
• Phillips Head Screwdriver or Drill with Phillips Head Bit
Required Items:
• CE-REMOTE (OSD Remote Control)
Optional Items:
TO CAMERA
VIDEO
CONNECTION
POWER
CONNECTION
TO DVR
OR
MONITOR
ALIGN
CAMERA BASE
MOUNTING PLATE
HOOK
GREEN LED
POWER INDICATOR
