Climax Mobile Lite-R23, Installer'S Manual, Page: 36 / 46

- Enter ( 1 ) for talk-only mode.
- Enter ( 2 ) for two-way voice communication.
- Enter ( 3 ) for listen-in only mode.
- Enter ( 9 ) to hang up.
- Put the handset back to the base cradle to end the call.
- Press and hold the Active Button of Mobile Lite for 5 seconds, or press
Active Button of RF device (WTR, Fall Sensor or PB) once to end the
call.
- Press any DTMF key except for the designated hang-up key ( 9 ) to
reset the communication time to 5 minutes. When a DTMF key is
pressed, its designed shortcut function will also be executed along with
the communication time reset.
<
<
N
N
O
O
T
T
E
E
>
>

If you wish to enable a designed shortcut function, please press the DTMF
key for at least 1 second.

During two-way communication of a callback call, Mobile Lite location info
will be updated every minute. If there was a successful IP report before
the two-way communication, the location updates will be reported via the
previously successful IP channel.
6.5.3. Speech Reporting Method

If speech reporting method is selected, Mobile Lite will dial the
programmed number for reporting. It will establish a two-way voice
communication between the call recipient and Mobile Lite user.

The CMS can remotely control Mobile Lite during the voice
communication period using the DTMF commands below:
- Enter ( 1 ) for talk-only mode.
- Enter ( 2 ) for two-way voice communication.
- Enter ( 3 ) for listen-in only mode.
- Enter ( 9 ) to hang up.
- Put the handset back to the base cradle to end the call.
- Press and hold the Active Button of Mobile Lite for 5 seconds, or press
the Active Button of RF device (WTR, Fall Sensor or PB) once to end
the call.
- Press any DTMF key except for the designated hang-up key ( 9 ) to
reset the communication time to 5 minutes. When a DTMF key is
pressed, its designed shortcut function will also be executed along with
the communication time reset.
<
<
N
N
O
O
T
T
E
E
>
>

If you wish to enable a designed shortcut function, please press the DTMF
key for at least 1 second.

At 20 and 10 seconds before the communication time expires, Mobile Lite
will emit 1 beep via the telephone handset to alert the user.
33