
press the Help Button to connect to the test center.”
Step 3.
Press the Help Button once to continue with the Test. If no action
is taken, Mobile Lite will come out of test mode in programmed
period.
6.5. Alarm Activation
When an alarm is activated by pressing the Active Button of Mobile Lite or
the learnt-in RF device (WTR, Fall Sensor or PB), or pulling the cord of
PCU, Mobile Lite will emit a voice prompt “Initiating Help” as it enters
guard time (default 10 seconds).
If alarm is activated by fall detection, Mobile Lite will emit a voice prompt
“Fall detected” as it enters guard time fall sensor (default 10 seconds).
If there are no report destinations programmed, Mobile Lite will not report
upon alarm activation and will emit 1 beep as a reminder.
Mobile Lite will also report its location along with the alarm report (please
refer to
6.3. GPS/Wi-Fi Locate Function
) provided the programmed
report method(s) supports location report.
If Mobile Lite is activated while having a Cellular Network fault (Amber
LED flashes once every 3 seconds), by the time guard time expires it will
play voice prompt “Poor cellular connection. Please call 911.” to alert user
to call 911 by themselves.
Guard Time
When the Active Button on Mobile Lite is pressed for 2 seconds, the
device will play voice prompt “Initiating Help” and enter guard time.
During guard time, the device will emit one beep every second. If a false
alarm is triggered, it can be canceled during guard time by pressing and
holding the Active Button for 5 seconds.
After the Guard Time has expired, Mobile Lite will begin report, the alarm
event cannot be cancelled after Guard Time has expired
Guard Time Fall Sensor
The Guard Time for Fall Sensor’s fall detection function is set separately
from regular Guard Time.
If a false alarm is triggered by Fall Detection, it can be canceled within the
guard time fall sensor period by pressing the Active Button of Mobile Lite
for 5 seconds or pressing the Active Button of the learnt-in RF device for a
duration determined by the device (please refer to the device user
manual).
After the Guard Time Fall Sensor has expired, Mobile Lite will begin report,
the alarm event cannot be cancelled after Guard Time Fall Sensor has
28