6.3. GPS/Wi-Fi Locate Function
Mobile Lite location info can be acquired in 3 ways.
1.
Activate an alarm
When an alarm is activated, Mobile Lite will also report its location info
along with the alarm event. (For IP & SMS Reporting)
During two-way communication following a successful IP report,
Mobile Lite location info will be updated every minute, and reported via
the previously successful IP channel. (For Speech Reporting or
Callback call)
2. Auto Check-In Report or LB
When the Mobile Lite makes the auto check-in report to CMS, its
location info will also be updated and sent with the report.
3.
Send SMS command LOC
If the SMS Command LOC is correct and successfully received,
Mobile Lite will report location info to programmed report destination
and the sender of the SMS command according to command selection.
Refer to
8.1 SMS Remote Programming Commands Table
for more
details.
For IP reporting, the Location coordinates will be included in JSON report.
For SMS reporting, the location info is sent as a webpage link for Google
Map. Click the link to display the location.
For Speech reporting or callback call, the location info will be updated
every minute, but the location cannot be sent via two-way communication.
There must be one successful IP report before two-way communication
for the Mobile Lite to report and update the location through.
If Mobile Lite is under low battery and makes a second low battery report
to the CMS, the location function will be turned off.
6.4. Test Mode
Test Mode is for user to test if the Mobile Lite can make a successful
report to the CMS.
To enter Test Mode:
Step 1.
Press and hold the Info button for 3 seconds. At the 3
rd
second
Mobile Lite will emit one beep and play voice prompt “Release for
testing device or continue to hold for next option. Release the
button to enter Test mode.
Step 2.
Mobile Lite R23 will play voice prompt “Entering Test Mode,
27