III.
Screw the triangular bracket into the wall plugs with the two pointing sticks on bottom facing you.
IV.
Fit the PIR onto the hooks of the triangular bracket.
Surface mounting with rotating bracket (optional item, sold separately):
The rotating bracket can be mounted on the wall with provides screws.
I.
Screw the rotating bracket into the wall.
II. Fit the 3 hooks of the rotating bracket into the 3 holes of the base accordingly.
III. Rotate the bracket for the proper range of detection and tighten the fixing screw.
Installation
Decide on the location of the PIR and if it is to be corner or surface mounted.
After the installation site is selected, follow the steps described above to mount the PIR.
Press the Test Button to enter Test Mode. Walk around the protected area noting when the LED lights up and check that the
detection coverage is adequate.
When detection coverage is found to be satisfying, installation is now completed.
Installation Recommendations
The PIR is designed to give a typical detection range of 10 meters when mounted at 2.3-2.5 meters above ground.
When Pet-Immunity function is enabled, it will not detect pets of up to 50 cm/20 kg when mounted at 2.3-2.5 meters above ground.
To take full advantage of PIR, the following guidelines should be considered:
It is recommended to install the PIR in the following locations
Mount the detector at 2.3M-2.5M height for best performance:
3
