Climax FF6300, Operating Manual

Page: 19 / 132

P/N 80679, Rev. 10 Page 3
machine when using the OD mount assembly.
Lifting – Many CLIMAX machine components are very heavy. Whenever
possible, use proper hoisting equipment and rigging to lift the machine or
its components. Always use the lifting points designated on the machine.
Follow the lifting instructions in Section 3.3 on page 27. Be cautious;
never drop electrical equipment as this will damage the components.
Lock out/tag out – Lock out and tag out the machine before performing
maintenance or entering the danger zone to adjust this machine.
Moving parts – CLIMAX machines have numerous exposed moving parts
and interfaces that can cause severe impact, pinching, cutting, and other
injuries.
During machine operation:
•
Keep hands and tools away from moving parts.
• Remove gloves and secure hair, clothing, jewelry, and pocket items to
prevent them from becoming entangled in moving parts.
Sharp edges – Cutting tools and workpieces have sharp edges that can eas-
ily cut skin. Wear protective gloves and exercise caution when handling a
cutting tool or workpiece.
Hot surfaces – During operation, motors, pumps, HPUs, and cutting tools
can generate enough heat to cause severe burns. Pay attention to hot-sur-
face warning labels and avoid contact with bare skin until the machine has
cooled.
1.4 M
ACHINE
-
SPECIFIC SAFETY PRECAUTIONS
Eye hazard – This machine produces metal chips during operation. Always
wear eye protection when operating the machine.
Sound level – This machine produces potentially harmful sound levels.
Always wear hearing protection when operating the machine or working
around it. During testing, the machine produced the following sound lev-
els.
1
T
ABLE
1-1. S
OUND LEVELS
Pneumatic Hydraulic
Sound power 87.3dBA 78.9dBA
Operator sound pressure 76dBA 65dBA
Bystander sound pressure 74dBA 68dBA
1. Machine sound testing was conducted in accordance with European Harmonized
Standards EN ISO 3744:2010 and EN 11201:2010.