Outdoor Curtain PIR Motion Sensor Camera VST-892EXC
VST-892EXC is an outdoor curtain passive infrared (PIR) motion sensor camera. It is capable of sending wireless signals and
captured images (picture quality of up to 640 x 480 pixels) to the Control Panel upon movement detection.
Featuring night illumination capability, with UV resistant housing, and waterproof to IP65 standard, VST-892EXC is ideal for
backyards, lawns, gates, outdoor corridors and hallways.
The Outdoor Curtain PIR Camera is designed to give a typical detection range of 12 meters when mounted at 1.4-2.5 meters
above ground. It two detection options: horizontal curtain and vertical curtain. Horizontal curtain can prevent animals up to 60 kg;
vertical curtain is ideal for perimeter applications.
Besides, VST-892EXC is designed with the digital proximity detector. The anti-masking feature allows for detection of any
attempts to blind the detector by placing objects in its field of view.
VST-892EXC is also compatible with Climax’s Repeater RP-29/Router RMB-29, which can further extend the RF communication
range into hard-to-reach areas.
The VST-892EXC Series includes the following models:
VST-892EXC – Outdoor curtain PIR camera with flash LED
VST-892EXC-IL – Outdoor curtain PIR camera with Infrared LED
Identifying the Parts
Front View Inside View
1. Digital Proximity Detector
The digital proximity detector is used to detect any masking (blocking) attempt by an intruder.
2. LED Indicator (Red)
The LED indicator is used to indicate the system status.
3. Flash LED / Infrared LED
The Flash LED (For VST-892EXC) or Infrared LED (For VST-892EXC-IL) delivers sufficient light for image capture
under low lighting condition.
4. IR Sensor
The sensor is intended to detect moving objects.
5. PIR Camera Lens
6. Test&Learn Button
-Press and hold the button for 3 seconds to send a learn code, and then release the button when Red LED lights up.
-Press the button once to enter test mode for 10 minutes.
-Press the button once to send a learn code to the repeater/router.
7. Internal Tamper
8. DIP Switch Block
9. Battery Compartment
10. Mounting Bracket
11. Rotating Holder
1
