1
SD-29 Smoke Detector Series
SD-29 Series is a mini-sized wireless smoke detector with built-in PIR motion sensor and heat detection capability. Designed to protect your
family against potential fire hazards, the Smoke detector is also capable of detecting movements and reporting temperature to users. The
Smoke Detector is in serial connection with other Smoke Detectors in the alarm system and will raise alarm when any Smoke Detector in the
system is triggered
(SD-29-HME-SC only)
.
The Smoke Detector includes the following models:
Model Name
Heat Detection
PIR Motion Sensor
Emergency Light
Serial Connection
SD-29-H
O
SD-29-HM
O
O
SD-29-HME
O
O
O
SD-29-HME-SC
O
O
O
O
Parts Identification
1. LED Indicator / Test Button / Emergency Light
Red LED
Quick flash: Alarming.
Flashes every 1 second: Smoke Detector under Sleep Mode
Flashes every 2 seconds: Smoke Detector under warmup and calibration process.
Flashes every 4 seconds with Orange LED: battery exhausted.
Flashes briefly: When Learn Button is pressed to see if the device is functioning normally.
Lights up briefly: Transmitting signal.
Orange LED
Flashes every 4 seconds with RED LED: battery exhausted.
Flashes every 5 seconds: Calibration Failure
Flashes every 45 seconds: Low battery condition
Learn/Test Button
Press the button once to:
Send a supervision / test signal.
Check smoke detection chamber.
Silence alarm.
Press and hold the button for 10 seconds to enter calibration process.
White LED (Emergency Light)
The emergency light will begin to flash slowly to alert uses that the system is alarming.
(SD-29-HME only)
2. IR Lens
(SD-29-HM/SD-29-HME only)
3. Buzzer
4. Battery Compartment Fixing Screw
5. Battery Compartment
6. Hooks
7. Mounting Bracket
8. Mounting Holes
The Hooks of the Mounting Bracket can hook into this Mounting Hole.
9. Mounting Sheet
