www.directed.com
32
z
Disarm: The accessory output will auto-activate when the system is disarmed.
z
Both: The accessory output will auto-activate when the system is armed and
disarmed.
accessory output timer duration
z
Start Timer: Press the arm/disarm button; the siren will chirp to signal the start
of the timer duration setting.
z
Stop Timer: Press the arm/disarm button; the siren will chirp to signal the end of the
timer duration setting, or for maximum time, do not press the arm/disarm button.
interrupt no/nc
z
NO: If the starter immobilizer circuit is normally open and power is lost to the
system, the circuit will remain open and the starter will not operate.
z
NC: If the starter immobilizer circuit is normally closed and power is lost to the
system, the circuit will close and the starter will operate normally.
rpm programming
z
This feature applies only if IntelliStart 4 is installed.
z
Programs the tachometer input for the IntelliStart 4. For more information, see
programming note #4.
engine type gas/diesel
z
This feature applies only if IntelliStart 4 is installed.
z
Petrol: The IntelliStart will crank the engine three seconds after the ignition is
turned on or after input on the wait-to-start wires ceases.
z
Diesel: The IntelliStart will crank the engine 20 seconds after it turns the ignition
on and will ignore the wait-to-start input wires.
N
NO
OTTEE:: RPM must be reprogrammed after changing this feature.
smart windows program
z
This feature applies only if SmartWindows is installed.
z
Enter this feature and then follow the programming instructions included with
SmartWindows.
