Clevo W950JU User Manual Download Page 149

Page: 149 / 222

Modules & Options

Intel® Rapid Storage Technology 6 - 13

Intel

Rapid Storage Technology

Install the

Intel® Rapid Storage Technology

to support your AHCI mode SATA

drive.

IRST Driver Installation

Insert the

Device Drivers & Uti User’s Manual

disc into an attached

DVD drive.

2. Click

Option Drivers

(button).

3. Click

3.Install IRST Driver

> Yes

4. Click

Next

5. Click in the check box to accept the license and click

Next

6. Click

Next > Next > Next

7. Click

Finish

to restart the computer.

8. Run the

Intel® Rapid Storage Technology

app from the

Apps

screen.



IRST and M.2 PCI-e

SSDs

Note that Intel® Rapid
Storage Technology

does not support M.2
SSDs with a

PCI-e In-

terface

(M.2 SSDs with

a SATA Interface are
supported).

Summary of Contents for W950JU































































































































































































































Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands

Clevo W950JU, User Manual

Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands