Clevo W830T, User Manual

Page: 122 / 172

Modules & Options
7 - 24 3.75G/HSPA Module
7
HSPA Modem Interface
With the 3.75G / HSPA module and USIM card (supplied by your service provider)
installed you may then install the HSPA Modem Interface . The HSPA Modem In-
terface allows you to directly access your HSPA internet service from the computer.
HSPA Modem Interface Installation
1. Enable power to the module by pressing the Fn + key combination (the
on screen icon will indicate the module’s power status).
2. If a Found New Hardware window appears, click Cancel .
3. Insert the Device Drivers & Uti User’s Manual disc into your exter-
nal optical device drive.
4. Click Option Drivers (button).
5. Click 3.Install 3.5G Driver > Yes , and then click Next .
6. Click Next > Install .
7. Click Finish to restart the computer.
8. Access the HSPA Modem Interface from the Start menu ( Start > Pro-
grams/All Programs > HSPA modem ), or by double-clicking the HSPA
modem icon on the desktop.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see
Table 1
- 4, on page 1 - 13 / Table 1
- 2, on page 1 - 9 ).