Clevo W550SU2 User Manual Download

Page: 212 / 256

Troubleshooting

8 - 10 Problems and Possible Solutions

I am sliding my finger up and down on the
right side of the

Touchpad to scroll

Window and the

Touchpad does not

respond

There are different Touchpad versions available on this computer, and this
version requires tapping/holding to scroll.

Either tap repeatedly, or hold the

finger down, at the top or bottom right of the Touchpad (depending on the
scrolling direction required) to scroll the window.

The

system freezes

or the screen goes

dark.

The system’s power saving features have timed-out

. Use the AC/DC adapter,

press the sleep (

Fn + F4

) key combination, or press the power button if no LEDs

are lit.

The system never goes into a

power

saving mode

Power Options features are not enabled. Go to the

Windows

Power Options

menu and enable the features you prefer (see

“Power-Saving States” on

page 3 - 7

). Make sure you have enabled

Hibernate

mode from the control

panel.

The

Wireless LAN/Bluetooth

modules

cannot be detected.

The modules are off as the computer is in

Airplane Mode

Go to the

Charms

Bar

and select

Settings

and then click the WiFi icon (Airplane mode should be

Off).

Problem

Possible Cause - Solution



Other Keyboards

If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will
detect and enable it automatically. However special functions/hot keys unique to the system’s regular keyboard may not
work.

Summary of Contents for W550SU2

































































































































































































































































Search results

Summary of Contents for W550SU2

Reviews:

Related manuals for W550SU2

Brands by name

Popular brands

Clevo W550SU2, User Manual

Search results

Summary of Contents for W550SU2

Reviews:

Related manuals for W550SU2

Brands by name

Popular brands