Clevo W515GU User Manual Download Page 119

Page: 119 / 224

Drivers & Utilities

Driver Installation 4 - 9

Optional Drivers

See the pages indicated for the driver installation pro-
cedures for any modules included in your purchase op-



Windows Update

After installing all the drivers make sure you enable

Win-

dows Update

in order to get all the latest security up-

dates etc. (all updates will include the latest

hotfixes

from Microsoft).

To enable

Windows Update make sure you are con-

nected to the internet

Go to the

Control Panel

Click

Windows Update

(System and Security/

Security).

Click

Check for updates

(button).

The computer will now check for updates (you
need to be connected to the internet).

Click

Install now

(button) to begin checking for the

updates.

Click

Install updates

(button) to install the

updates.

Summary of Contents for W515GU

































































































































































































































Search results

Summary of Contents for W515GU

Reviews:

Related manuals for W515GU

Brands by name

Popular brands

Clevo W515GU, User Manual

Search results

Summary of Contents for W515GU

Reviews:

Related manuals for W515GU

Brands by name

Popular brands