Clevo W270HUQ Series, Service Manual

Page: 36 / 95

Disassembly
2 - 12 Removing and Installing a Processor
2.Disassembly
5. Turn the release latch towards the unlock symbol to release the CPU ( Figure 9d ).
6. Carefully (it may be hot) lift the CPU up and out of the socket ( Figure 9e ).
7. Reverse the process to install a new CPU.
8. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
5
6
Figure 8
Processor Removal
(cont’d)
d. Turn the release latch to
unlock the CPU.
e. Lift the CPU out of the
socket.
c.
d.

Caution
The heat sink, and CPU area in
general, contains parts which are
subject to high temperatures. Allow
the area time to cool before remov-
ing these parts.
Unlock Lock
5
6
5

6. CPU