manualshive.com logo in svg

Clevo P870KM, User Manual

Share
Download
Clevo P870KM User Manual Download Page 179

Modules

Wireless LAN Module 6 - 31

6

WLAN Configuration in Windows 10

You can configure a wireless connection using one of the following options, how-
ever make sure the Wireless LAN module is turned on (and not in Airplane Mode)
before configuration begins.

1.

Click the Wireless icon 

 in the notification area of the taskbar.

2.

Make sure that 

Airplane mode

 is 

off

 (the Airplane mode icon should be gray).

3.

A list of available access points will appear.

4.

Double-click an access point to connect to it (or click it and click 

Connect

).

 AC/AD WLAN Module 

Wi-Fi Selection

When using the AC/AD
WLAN Module a drop-
down menu of 2 WiFi
adapters will appear.
This is a standard con-
figuration, make sure
you select the appropri-
ate adapter to see the
available access points.

Figure 6 - 18

WiFi & Network 

Connections

Summary of Contents for P870KM











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands