manualshive.com logo in svg

Clevo P870KM, User Manual

Share
Download
Clevo P870KM User Manual Download Page 174

Modules

6 - 26 Setting Up SATA RAID, Optane™ or AHCI Mode

6

Clearing 

Intel® Optane™

If you wish to clear an existing 

Intel® Optane™

 setup then follow the procedure be-

low to do so. However 

backup up any necessary files and data before clearing an

Intel® Optane™ setup

, as doing so will result in the loss of all data on the volumes.

1.

Make sure that 

Intel® Optane™ 

is

 Enabled 

in the

 Intel® Rapid Storage Tech-

nology 

application.

2.

Start-up your computer and press <F2>

 

to enter the 

BIOS

.

3.

Go to 

Intel(R) Rapid Storage Technology

 (in the 

Advanced

 menu) and press 

<Enter>.

4.

Select 

Intel Optane, ****

 (listed under 

Optane Volume:

) and press <Enter>.

Figure 6 - 15

Intel(R) Rapid 

Storage Technology

 

(

Advanced

 

Menu

) 

Summary of Contents for P870KM











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands