manualshive.com logo in svg

Clevo P6x0Hx, User Manual, Page: 46 / 368

Share
Download
Clevo P6x0Hx User Manual Download Page 46

1 - 10 Illuminated Colored LED Keyboard

Quick Start Guide

1

Illuminated Colored LED Keyboard

The illuminated colored keyboard has an embedded numerical keypad for easy nu-
meric data input, and features function keys to allow you to change operational fea-
tures instantly. See 

Table 1 - 6, on page 1 - 22

 for full function key combination

details.

Figure 1 - 4

 - Illuminated LED Keyboard

Other Keyboards

If your keyboard is dam-
aged or you just want to
make a change, you can
use any standard USB
keyboard. The system will
detect and enable it auto-
matically. However spe-
cial functions/hot-keys
unique to the system’s
regular keyboard may not
work.

Scr Lk

Hold down the 

Fn Key

and Scr Lk to enable
scroll lock and check the
LED indicator for status. 

Numerical 

Play/Pause Key

Function Keys

Scr Lk Key

Fn Key

Game Control Keys

Num Lk Key

Windows Logo Key

Menu/Application Key

Numerical 
 Keypad

Special Characters

Some software applications allow the number-keys to be used with 

Alt

 to produce special characters.

These special characters can only be produced by using the numeric keypad. Regular number keys (in
the upper row of the keyboard) will not work. Make sure that 

NumLk

 is on.

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Reviews:

No comments