Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" SATA hard disk
drives with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary driv-
ers and utilities (as outlined in
Chapter 4 of the User’s Manual
) when setting up a new hard disk.
Hard Disk Upgrade Process
1.
Turn off the computer, and turn it over and remove the battery (
2.
Locate the Hard disk bay cover and remove the screw
.
3.
Slide the bay cover
until the case markers
align.
4.
Carefully lift the bay cover
off the computer (
).
Figure 3
HDD Assembly
Removal
a. Remove the screw.
b. Slide the cover until the
case markers align.
c. Remove the bay cover.
3. Hard disk Bay
Cover
•
1 Screw
1
3
2
3
a.
c.
1
3
2
b.
3
Summary of Contents for P375SM
