Clevo NL40CU, Service Manual

Page: 29 / 88

Disassembly
Removing the Battery 2 - 5
2.Disassembly
Removing the Battery
1. Turn off the computer, turn it over.
2. Remove screws - on the bottom case ( Figure 1a ).
3. Note to remove screws - , do so with the screwdriver angled at about 90 degrees to the computer surface
as shown ( Figure 1b
)
.
4. Carefully lift the bottom case up.
5. The battery will be visible at point on the computer ( Figure 1c ).
1 11
6 9
12
13

12. Bottom Case
• 11 Screws
Figure 1
Battery Removal
a. Remove the screws.
b. Remove the bottom case.
c. Locate the battery.
a.
b.
1
2
4
c.
8
5
6
7
3
9
10
11
13
12
8
6
7 9