Clevo NB55TK1 User Manual Download

Page: 206 / 304

Troubleshooting

7 - 4 Viruses

Viruses

• Install an

Anti-Virus

program and keep the

definitions

file

(the file which tells your program which viruses

to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm
your computer and cause you to lose data.

Anti-Virus

programs are commercially available and the

defini-

tions

file updates

are usually downloadable directly from the internet.

• Be careful when opening e-mail from sources you don’t know.

Viruses

are often triggered from within

mail attachments

so take care when opening any attached file. You can configure most

Anti-Virus

pro-

grams to check all

e-mail attachments

Note

: You should also beware of files from people you know as the

virus may have infected an

address book

and been automatically forwarded without the person’s knowl-

edge.

• Keep a “

Bootable CD-ROM/DVD-ROM/USB storage device

” (this CD/DVD/USB device provides basic

information which allows you to startup your computer) handy. You may refer to your OS’s documentation
for instructions on how to make one, and many

Anti-Virus

programs will also provide such a disk (or at

least instructions on how to make one).

Summary of Contents for NB55TK1

















































































































































































































































































































Search results

Summary of Contents for NB55TK1

Reviews:

Related manuals for NB55TK1

Brands by name

Popular brands

Clevo NB55TK1, User Manual

Search results

Summary of Contents for NB55TK1

Reviews:

Related manuals for NB55TK1

Brands by name

Popular brands