background image

Modules

Wireless LAN Module 6 - 23

6

Wireless LAN Module

If you have included an 

Intel

®

 Wireless LAN & Bluetooth Combo module

 is on

(i.e. the system is not in 

Airplane Mode

) before installing the driver.

Make sure you install the drivers in the order indicated in 

Table 2 - 1, on page 2 - 4

.

Note that you need to install both the WLAN & Bluetooth drivers for the WLAN
& Bluetooth Combo modules. 

Intel® WLAN Driver Installation

1.

Make sure the system is not in Airplane Mode

, and then insert the 

Device 

Drivers & Uti User’s Manual 

disc into the DVD drive. 

2.

Click

 

Option Drivers

 (button).

3.

Click

 

1.Install WLAN Driver > Yes

.

4.

Click in the check box to agree to the 

End User License Agreement

 and click 

Install

.

5.

Click 

Finish

.

6. The operating system is the default setting for Wireless LAN control in 

Windows 

(see page 

6 - 24

).

Wireless Device 

Operation Aboard 

Aircraft

The use of any portable
electronic transmission
devices aboard aircraft
is usually prohibited.
Make sure the 

WLAN &

Bluetooth module(s)
are OFF

 if you are using

the computer aboard
aircraft by putting the
system in to 

Airplane

Mode

 (see 

Table 1 - 4,

on page 1 - 12

).

Summary of Contents for NB55TK1

















































































































































































































































































































Reviews: