Clevo NB55TK1, User Manual

Page: 121 / 304

Power Management
Removing the Battery 4 - 25
4
Removing the Battery
We recommend that you do not remove the battery yourself. If you do need to remove
the battery for any reason (e.g. long term storage) see below.
1. Turn the computer off, and carefully turn it over.
2. Slide the latch in the direction of the arrow.
3. Slide the latch in the direction of the arrow, and hold it in place.
4. While holding the latch in place, slide the battery out from point in the
direction of the arrow .
5. Remove the battery.

Bottom Cover
Removal Warning
Do not remove any cov-
er(s) and /or screw(s) for
the purposes of device
upgrade as this may vio-
late the terms of your
warranty.
If you need to replace/
remove the hard disk/
RAM/optical device etc.,
for any reason, please
contact your distributor/
supplier for further infor-
mation.
Figure 4 - 16
Battery Removal
1
2
2 3
4
1 2
3