manualshive.com logo in svg

Clevo N870, User Manual

Share
Download
Clevo N870 User Manual Download Page 247

Video Driver Controls

Video Driver Installation C - 1

C

Appendix C: Video Driver Controls

The basic settings for configuring the LCD are outlined in 

“Video Features” on

page 1 - 42

. The basic video features for this computer can be configured using the

Intel(R) HD Graphics Control Panel

. Further video configuration is available

through the 

NVIDA

 control panel. Make sure you install the drivers in the order in-

dicated in 

Table 4 - 1, on page 4 - 4

. 

Video Driver Installation

Video (VGA)

1.

Click 

2.Install VGA Driver > Yes

.

2. Click 

Next > Yes > Next > Next

.

3. Click 

Finish

 to restart the computer.

NVIDIA Video (VGA)

1.

Click 

3.Install NVIDIA VGA Driver > Yes

.

2. Click 

AGREE AND CONTINUE (

button) to accept the terms of the 

license agreement.

3. Click 

Next.

4. Click 

Close

 to complete the installation.

5. After all the drivers have been installed (an internet connection is required) 

run the 

NVIDIA GeForce Experience

 by clicking the desktop icon 

 (or 

App).

Video Card Options

Note that this computer
model series may support a
range of CPUs and/or vid-
eo adapters. 

To get information on your
system’s 

video adapter

 go

to the 

Start

 menu and se-

lect 

Settings

, and then se-

lect 

System

 and click

Display> Advanced dis-
play settings > Display
adapter properties.

Note that card types, spec-
ifications and drivers are
subject to continual up-
dates and changes. Check
with your distributor/suppli-
er for the latest details on
video cards supported.

Summary of Contents for N870



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands