manualshive.com logo in svg

Clevo N850HJ1, User Manual

Share
Download
Clevo N850HJ1 User Manual Download Page 266

Video Driver Controls

C - 10 HDMI Audio Configuration

C

HDMI Audio Configuration

HDMI (High-Definition Multimedia Interface) carries both 

audio

 and video signals.

In some cases it will be necessary to go to the 

Sound

 control panel and manually

configure the HDMI audio output as per the instructions below.

1.

Go to the 

Sound

 control panel.

2.

Click 

Playback

 (tab)

3.

The playback device will be selected.

4.

You may need to select the audio device and click 

Set Default

 

(button).

5.

Double-click the device to access

 

the control panel tabs.

Volume Adjustment

The sound volume level
can be clicking using the
volume control icon 
in the

 notification area

of the taskbar

.

Figure C - 7

Sound - HDMI 

Device (set Default)

Summary of Contents for N850HJ1

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands